ESL Heat Seal Type | Ukobvu/µm | Korona | Kurapa | Upamhi/mm |
| 15-40 | Rutivi rumwe chete | Chisimbiso chekupisa chine mativi maviri | 300-2100 |
Kuenzanisa kwekabhoni yePLA nemamwe mapurasitiki 
Data source: European Plastiki: Kuenzanisa kweCO2 inoburitswa kubva mukugadzirwa kwepolymer
Mashandisirwo Azvo 
Hunhu hweChigadzirwa · Yakagadzirwa ne polylactic acid, chigadzirwa ichi chinopa mukana wakanaka wekushanda pamwe chete uye kuora kwezvakatipoteredza, zvichiita kuti chisakuvadze nharaunda.
· Kutumirwa kwechiedza chakawanda, kutonhora kwakaderera, kupenya kwepamusoro kwakanaka, uye kudhindwa kwakanaka kwazvo.
· Hunhu hwakanaka hwekuvhara kupisa, zvichibvumira kuvhara kupisa zvakananga pasina kuda manamatisi.
· Kugona kugadzikiswa zvakanaka, kusanganisira kugadzikana kwakanaka kwekukombama uye kuchengetedza kukotama.
Zviratidzo Zvikuru zveUnyanzvi | Muenzaniso weChigadzirwa | ESL Kupisa kwerudzi rwechisimbiso | |||||
| Chinhu | Maitiro Ekuyedza | Chikamu | Kukosha Kwakajairika (15) | Kukosha Kwakajairika (25) | Kukosha Kwakajairika (40) | |
| Ukobvu hwechigadzirwa | GB/T 6672 | μm | 15 | 25 | 40 | |
| Kutsauka kweAvhareji yeKobvu | - | % | ±3.0 | ±3.0 | ±3.0 | |
| Simba reKusimba (MD) | MD | GB/T 1040.3 | MPa | 120 | 125 | 120 |
| Simba reKusimba (TD) | TD | 120 | 125 | 130 | ||
| Kuwedzerwa Kwekugumisa (MD) | MD | GB/T 1040.3 | % | 115 | 125 | 120 |
| Kuwedzerwa Kwekugumisa (TD) | TD | 120 | 120 | 125 | ||
| Kupisa Kushoma (MD) | MD | GB/T 12027 (100℃, 10min) | % | 3,5 | 4 | 3,5 |
| Kudzikira kwekupisa (TD) | TD | 0,5 | 0,5 | 0,5 | ||
| Kushanda Kwekukweshana Kwesimba | GB/T 10006 | - | - | - | - | |
| Kushushikana Kwemvura | GB/T 14216 | mN/m | 42 | 42 | 42 | |
| Kusviba | GB/T 2410 | % | 1,5 | 1,5 | 1,5 | |
| Kutumira Chiedza | 94 | 94 | 94 | |||
| Kupenya (Angle ye45°) | GB/T 8807 | % | 85 | 85 | 85 | |
| Simba reChisimbiso cheKupisa (kaviri) | 135kpa/85℃/2S | N/15mm | 2,8 | 3,8 | 5 | |