Muenzaniso weECP wakajairika | Ukobvu/µm | Korona | Kurapa | Upamhi/mm |
| 15-40 | Rutivi rumwe chete | Hakuna | 300-2100 |
Kuenzanisa kwekabhoni yePLA nedzimwe mapurasitiki 
Data source: European Plastiki: Kuenzanisa kweCO2 inoburitswa kubva mukugadzirwa kwepolymer
Kufukidzwa Kwekushandiswa 
Hunhu hweChigadzirwa · Yakagadzirwa ne polylactic acid, chigadzirwa ichi chinopa mukana wakanaka wekushanda pamwe chete uye kuora kwezvakatipoteredza, zvichiita kuti chisakuvadze nharaunda.
· Kutumirwa kwechiedza chakawanda, kutonhora kwakaderera, kupenya kwepamusoro kwakanaka, uye kudhindwa kwakanaka kwazvo.
· Hunhu hwakanaka hwekuvhara kupisa, zvichibvumira kuvhara kupisa zvakananga pasina kuda manamatisi.
· Kugona kugadzikiswa zvakanaka, kusanganisira kugadzikana kwakanaka kwekukombama uye kuchengetedza kukotama.
Zviratidzo Zvikuru zveUnyanzvi | Muenzaniso weChigadzirwa | ECP Standard | |||||
| Chinhu | Maitiro Ekuyedza | Chikamu | Rudzi Kukosha (25) | Rudzi Kukosha (28) | Rudzi Kukosha (40) | |
| Ukobvu hwechigadzirwa | GB/T 6672 | μm | 25 | 28 | 40 | |
| Kutsauka kweAvhareji yeKobvu | - | % | ±3.0 | ±3.0 | ±3.0 | |
| Simba reKusimba (MD) | MD | GB/T 1040.3 | MPa | 150 | 150 | 135 |
| Simba reKusimba (TD) | TD | 140 | 140 | 140 | ||
| Kuwedzerwa Kwekugumisa (MD) | MD | GB/T 1040.3 | % | 105 | 102 | 120 |
| Kuwedzerwa Kwekugumisa (TD) | TD | 130 | 125 | 125 | ||
| Kupisa Kushoma (MD) | MD | GB/T 12027 (100℃, 10min) | % | 3,5 | 3,5 | 3,5 |
| Kudzikira kwekupisa (TD) | TD | 1,5 | 1,5 | 1 | ||
| Kushanda Kwekukweshana Kwesimba | GB/T 10006 | - | 0,35 | 0,35 | 0,35 | |
| Kuoma Kwemvura Pamusoro | GB/T 14216 | mN/m | 42 | 42 | 42 | |
| Mhute | GB/T 2410 | % | 1,5 | 1,5 | 1,5 | |
| Kutumira (Kutumira) |
| 94 | 94 | 94 | ||
| Kupenya (45°) | GB/T 8807 | % | 85 | 85 | 85 | |
| Kureba kwemupumburu (m): standard 4000 (zvimwe zvichienderana nechikumbiro chemutengi) |
| |||||
| Upamhi (mm): 300–2100 |
|
|
|
|
|
|
| Saizi yepakati pepepa (masendimita): 3.6 |
|
|
|
|
|
|