Products
●Raw Material: Polyamide 6 (PA6)
●Process: Step by step double direction stretch
PRODUCT APPLICATION CHARACTERISTICS 
Superior mechanical properties (tensile resistance, impact resistance, puncture resistance, etc.) 
Excellent film surface straightness with high print registration accuracy 
Extreme temperature resistance, packaging remains stable after retort sterilization 
RECOMMENDED PROCESSING CONDITIONS | Type (Thickness) | Corona Surface | Print Capacity | Box Pattern | Seal Width | Retort Resistance |
| HOA1-15μm | One Side | ≤9 colors | Available 1 | ≤6 cm | ≤121℃ |
Note: Processing recommendations may vary depending on production techniques & environment.
1 Box Pattern: Packaging design requires precision front/back pattern alignment
MAIN TECHNICAL PARAMETERS | Test Items | Typical Values | Testing standards |
| Tensile Strength (MD/TD) | 220/260 MPa | GB/T 1040.3-2006 |
| Pull Stretch | 100-150/90-130% | GB/T 1040.3-2006 |
| Puncture Resistance | 10 N | GB/T 10004-2008 |
| Heat shrinkage rate (MD/TD(160℃,5min) Heat Shrink | ≤1.5% | GB/T 12027-2004 |
| Surface Tension | No. 54/ No39 mN/m | GB/T 14216-2008 |
| Coefficient of Friction（(Static/Kinetic; Non/Non)） | 0.50/0.35 | GB/T 10006-2021 |
| Fog | 4.5% | GB/T 2410-2008 |
| Oxygen Transmission Rate | 50 cc/(㎡.day.atm) | GB/T 1038-2022 |
2"Non/Non": Measurement between non-corona surfaces
Note: Data based on standard laboratory conditions
STANDARD SPECIFICATIONS | Type (Thickness) | Roll Length/m | Standard Cutting Width/mm | Paper Core Size/in | Packaging |
| HOA1-15μm | 6000 | 300-1500 | 3 | 9 roll/pallet |
| 12000 | 6 | 4 roll/pallet | ||
| 24000 | 6 | 2 roll/pallet |
Customization specifications are available, consult for special needs.